BENTLY NEVADA 3500/44M

BENTLY NEVADA   3500/44M   Aeroderivitive GT VibrationMonitor

The 3500/44M Aeroderivitive GT Vibration Monitor is a four-channel instrument designed for aeroderivative gas turbine applications.  It:

Continuously monitors machinery by comparing monitored parameters against configured alarm setpoints to drive alarms

Communicates essential machine information for both operations and maintenance personne

The 3500/44M 's Aero GT I/O modules interface to Velomitor sensors and accelerometers through Bently Nevada interface modules. The monitor uses the Prox/Velom I/O to interface to our .

Using the 3500 Rack Configuration Software, you can configure the 3500/44M Aeroderivitive GT Vibration Monitor for the following filter options:

 Signal Integration

1X vibration tracking

Band-pass vibration

The 3500/44M Aeroderivitive GT Vibration Monitor accepts input from two separate Keyphasor signals, allowing each channel pair to use a different tracking filter.

You can configure multimode channels to have up to eight sets of alarm parameters including alert and danger setpoints and alarm time delays. Each set may be configured for a specific machine mode.

As the machine changes modes, the monitor can switch to a specific set using contacts on multimode I/O modules or software commands through a communications gateway.

Other models: 3500/05 , 3500/15 , 3500/20 , 3500/22 , 3500/22M , 3500/25 , 3500/32 , 3500/32M , 3500/33 , 3500/34 , 3500/40 , 3500/40M , 3500/42 , 3500/42M , 3500/44M , 3500/45 , 3500/46M , 3500/50 , 3500/53 , 3500/60 , 3500/61 , 3500/62 , 3600/63 ， 3500/64M , 3500/70M , 3500/72M , 3500/77M , 3500/90 , 3500/92 , 3500/93 , 3500/93 System Display , 3500/94 , 3500/95……

Many products have not been launched yet. If you need more products, please contact us

Purchase consultation hotline: 18120742318

BENTLY NEVADA 3500/44M气动GT振动监测仪
3500/44M aeroderivative GT振动监测仪是一种专为航改燃气轮机应用而设计的四通道仪器。它
通过将监测参数与配置的报警设定点进行比较来持续监测机械，以驱动报警
为操作和维护人员传达基本的机器信息
3500/44M的Aero GT I/O模块通过Bently Nevada接口模块与Velomitor传感器和加速计连接。显示器使用Prox/Velom I/O与我们的接口连接。
使用3500机架配置软件，您可以为以下过滤器选项配置3500/44M Aeroderivive GT振动监测器：
信号集成
1X振动跟踪
带通振动
3500/44M Aeroderivive GT振动监测器接受来自两个单独键相器信号的输入，允许每个通道对使用不同的跟踪滤波器。
您可以配置多模信道，使其具有多达八组报警参数，包括警报和危险设定点以及报警时间延迟。每组都可以针对特定的机器模式进行配置。
当机器改变模式时，监视器可以使用多模I/O模块上的触点或通过通信网关的软件命令切换到特定组。

其他型号：3500/05 , 3500/15 , 3500/20 , 3500/22 , 3500/22M , 3500/25 , 3500/32 , 3500/32M , 3500/33 , 3500/34 , 3500/40 , 3500/40M , 3500/42 , 3500/42M , 3500/44M , 3500/45 , 3500/46M , 3500/50 , 3500/53 , 3500/60 , 3500/61 , 3500/62 , 3600/63 ， 3500/64M , 3500/70M , 3500/72M , 3500/77M , 3500/90 , 3500/92 , 3500/93 , 3500/93 System Display , 3500/94 , 3500/95……

QQ:3699232536

邮箱:[email protected]