ABB DSQC611 (3HAC13389-2)

3HAC13389-2 is a component of ABB's robot system. It is a relay contactor unit used to switch high current loading on and off. The DSQC 611 contactor unit is designed for robot controllers and is typically installed in the control cabinet of the robot.
The DSQC 611 contactor unit is designed to handle loads up to 30 A and 400 VAC. It has two normally open (NO) and two normally closed (NC) contacts, which can be used to control different types of loads. The device is equipped with a built-in auxiliary contact that can be used to monitor the status of the contactor.

The DSQC 611 contactor unit is designed for easy installation and maintenance. It is equipped with spring-loaded terminals that are easy to connect and disconnect wires. The device also has contacts for LED indicator lights that display status, making it easy to solve problems.

Many products have not been launched yet. If you need more products, please contact us

Purchase consultation hotline: 18120742318

QQ：3699232536

Email: [email protected]

3HAC13389-2是ABB机器人系统的组成部分。它是一种继电器接触器单元，用于切换大电流加载打开和关闭。 DSQC 611 接触器单元设计用于机器人控制器，通常安装在机器人的控制柜。

DSQC 611 接触器单元设计用于处理高达 30 A 和 400 VAC 的负载。它有两个常开（NO）和两个常闭（NC）触点，可用于控制不同类型的负载。该装置配备了一个内置辅助触点，可用于监控接触器的状态。

DSQC 611 接触器单元设计为易于安装和维护。它配备了弹簧加载易于连接和断开接线的端子。该装置还具有显示状态的 LED 指示灯的触点，以便轻松解决问题。

许多产品尚未推出。如果您需要更多产品，请联系我们
购买咨询热线:18120742318

QQ:3699232536

邮箱:[email protected]

Mail consultation

Please feel free to give your inquiry in the form below.