ABB SB510 (3BSE000860R1)

ABB SB510 is a backup power supply module launched by ABB, with the model number 3BSE000860R1. This module is designed specifically for industrial automation systems such as DCS, PLC, protection devices, etc., providing uninterrupted power supply support to ensure the continuous operation of critical equipment in the event of a main power failure, avoiding data loss or process interruption. Its input voltage range covers 110V AC/230V AC, suitable for most industrial standard power environments worldwide.
core functionality
1. Dual voltage input support
Automatically adapt to 110V AC (± 15%) or 230V AC (± 15%) input without manual switching.
Compatible with North American (110V) and European/Asian (230V) power standards.
2. Backup power switch
When the main power supply is normal, the module supplies power to the load and simultaneously charges the internal battery.
When the main power supply is interrupted, it automatically switches to battery power supply to maintain load operation (switching time<10ms).
3. Battery management
Built in intelligent charging circuit, supporting constant current/constant voltage charging for lead-acid batteries or nickel cadmium batteries.
Provide battery overcharge, overdischarge, and temperature compensation protection to extend battery life.
4. Status monitoring and alarm
Real time display of power status (normal/faulty/charging) through LED indicator lights or communication interface.
Support dry contact alarm output (such as battery low voltage, power failure).
5. Redundant design

Supporting N+1 redundant configuration, multiple modules can be connected in parallel to improve system reliability.

Many products have not been launched yet. If you need more products, please contact us

Purchase consultation hotline: 18120742318

QQ：3699232536

Email: [email protected]

ABB SB510 是ABB公司推出的备用电源模块（Backup Power Supply），型号标识为 3BSE000860R1。该模块专为工业自动化系统（如DCS、PLC、保护装置等）设计，提供不间断电源支持，确保在主电源故障时关键设备持续运行，避免数据丢失或工艺中断。其输入电压范围覆盖 110V AC/230V AC，适用于全球多数工业标准电源环境。

核心功能

1.双电压输入支持

自动适应 110V AC（±15%）或 230V AC（±15%）输入，无需手动切换。

兼容北美（110V）和欧洲/亚洲（230V）电源标准。

2.备用电源切换

主电源正常时，模块为负载供电并同时为内部电池充电。

主电源中断时，自动切换至电池供电，维持负载运行（切换时间＜10ms）。

3.电池管理

内置智能充电电路，支持铅酸蓄电池或镍镉电池的恒流/恒压充电。

提供电池过充、过放、温度补偿保护，延长电池寿命。

4.状态监测与报警

通过LED指示灯或通信接口实时显示电源状态（正常/故障/充电中）。