SIEMENS 6DP1210-7BA

SIEMENS    FUM 210    6DP1210-7BA  functional module

The Siemens 6DP1210-7BA is a functional module belonging to the FUM 210 series. It is primarily used for sensor adjustment, rapid binary signal acquisition, drive control, sensor monitoring, and signal processing. This module is widely applied in the field of industrial automation and can meet diverse complex control requirements.  Multifunctionality: Suitable for both sensor adjustment and drive control, offering high flexibility.  High Performance: Fast signal acquisition speed, short response time, and capability to adapt to high-speed industrial environments.  Modular Design: Easily integrable into Siemens' automation systems.

FUM210ESG is a module used in the T-XP system by SIEMENS for drive control. Through configuration, it can control motors, solenoid valves, electric doors, dampers, and more. When driving an object is required, the AP sends a command, which is transmitted to the object via a specific channel (determined by hardware allocation and set during configuration). The command is executed without faults, and then status information is fed back, achieving the purpose of drive control. Additionally, the module can be configured redundantly, operating with one master and one slave in normal conditions.

西门子FUM 210 6DP1210-7BA功能模块

西门子6DP1210-7BA是FUM 210系列的一个功能模块。它主要用于传感器调整、快速二进制信号采集、驱动控制、传感器监测和信号处理。该模块广泛应用于工业自动化领域，可以满足各种复杂的控制要求。多功能性：适用于传感器调节和驱动控制，具有很高的灵活性。高性能：信号采集速度快，响应时间短，能够适应高速工业环境。模块化设计：易于集成到西门子的自动化系统中。
FUM210ESG是西门子T-XP系统中用于驱动控制的模块。通过配置，它可以控制电机、电磁阀、电动门、风门等。当需要驱动对象时，AP发送命令，该命令通过特定信道（由硬件分配确定并在配置期间设置）传输到对象。该命令无故障执行，然后反馈状态信息，达到驱动控制的目的。此外，该模块可以冗余配置，在正常情况下使用一个主设备和一个从设备运行。

QQ:3699232536

邮箱:[email protected]