GE IC695PSD140

The IC695PSD140 is a PACSystems RX3i Power Supply module that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). This module is specifically a DC power supply, designed for an input voltage range of 18-30 VDC and maximum input power of 60 Watts at full load. It has a nominal output current and voltage of 0-6 A @ 5.1 VDC and 0-9 A @ 3.3 VDC. 

The GE Fanuc RX3i PACSystems IC695PSD140 power supply module comes with LED indicators that provide status updates about the power supply. Every LED indicator is designed to show the operating status the power supply module. It has an input voltage ranging from 18 to 30 Volts DC, a nominal voltage rating of 24 Volts DC, and a maximum of 40 Watts of output power rating, with its 3 outputs included. This unit has no isolation, and it cannot be used with the GE Fanuc IC695PSA040 or IC695PSD040 power supplies under any circumstance. These units are not compatible with the IC695PSD140 power supply module and attempting to use them together can lead to equipment damage.

Email: [email protected]

IC695PSD140是PACSystems RX3i电源模块，由艾默生自动化制造，前身为通用电气智能平台（GE IP）。该模块专门为直流电源设计，输入电压范围为18-30VDC，满载时最大输入功率为60W。其标称输出电流和电压分别为0-6 [email protected] VDC和0-9 [email protected] VDC。

GE Fanuc生产IC695PSD140模块作为电源单元，也是RX3i PACSystems系列的成员。该模块是一个多用途电源，可以在冗余应用和负载共享应用中运行，使其成为一个多功能单元。IC695PSD140电源具有3个不同的输出点，额定电压为5.1伏直流，继电器输出额定电压为24伏直流，输出电压为3.3伏直流，供内部使用。3个输出与RX3i模块匹配良好，可用。该多用途电源可安装在RX3i PACSystems的通用背板上，占用一个插槽。它在系统中用作电源模块，但也可以与其他类似的电源组合，最多可以与3个附加模块组合。
GE Fanuc RX3i PACSystems IC695PSD140电源模块配有LED指示灯，可提供电源的状态更新。每个LED指示灯都设计用于显示电源模块的工作状态。它的输入电压范围为18至30伏直流，标称额定电压为24伏直流，最大输出功率为40瓦，包括3个输出。该装置没有隔离，在任何情况下都不能与GE Fanuc IC695PSA040或IC695PSD040电源一起使用。这些单元与IC695PSD140电源模块不兼容，试图将它们一起使用可能会导致设备损坏。

QQ:3699232536

邮箱:[email protected]