GE IS200TRLYH1BGF

Brand:GE

Model: IS200TRLYH1B

Part No: IS200TRLYH1BGF

Describe: Relay output terminal board

Status: New/Used

GE IS200TRLYH1BGF is a high-performance relay digital output (DO) module designed by General Electric's Energy Automation Division (now part of Baker Hughes) specifically for Mark VIe and Mark VIeS distributed control systems

GE IS200TRLYH1BGF

GE IS200TRLYH1BGF is a relay output terminal board (TRLY) for the GE Mark VI turbine control system. Its core mission is to convert the system's digital control commands (24VDC signals) into relay contact actions, directly driving on-site high-voltage equipment (valve actuators, pumps, fans, safety interlocks, alarm circuits), and achieving switch control and safety protection of the turbine unit. As a strong electrical interface between the system and on-site equipment, it integrates relays, terminal blocks, isolation circuits, and fault diagnosis, and is an indispensable core of the execution layer in turbine systems.


The core value of GE IS200TRLYH1BGF lies in its high availability and safety tailored for energy critical infrastructure:
• 16 independent relay channels: Each channel is equipped with Form C (SPDT) contacts (normally open+normally closed), which can flexibly adapt to various control logics.
High load capacity: Contact rated at 2 A @ 250 V AC or 2 A @ 30 V DC (resistive load), can directly drive small and medium-sized actuators.
Strong electrical isolation: Channel to channel and system to ground isolation voltage ≥ 1500 V RMS, in compliance with IEC 61010 safety standards.
Hot swappable support: can be safely replaced during Mark VIe system operation, minimizing unplanned downtime.
Front panel status indicator: Each channel is equipped with a dual color LED (green=active, red=faulty/not ready) for quick diagnosis.

Functional safety compatibility: Although not a SIL certified component, its high reliability design is commonly used for basic process control (BPCS) and safety related auxiliary circuits, and when combined with the overall system, it can meet the IEC 61508 concept.


Purchase consultation hotline: 18120742318
QQ:3699232536

Email: [email protected]



GE IS200TRLYH1BGF是GE Mark VI涡轮控制系统的继电器输出端子板(TRLY),核心使命是将系统的数字控制指令(24VDC信号)转换为继电器触点动作,直接驱动现场强电设备(阀门执行器、泵、风机、安全联锁、报警回路),实现涡轮机组的开关量控制与安全保护。 作为系统与现场设备的强电接口,它集成继电器、端子排、隔离电路与故障诊断,是涡轮系统中不可或缺的执行层核心。


GE IS200TRLYH1BGF 的核心价值在于其为能源关键基础设施量身打造的高可用性与安全性:
16独立继电器通道:每路配备Form C(SPDT)触点(常开+常闭),灵活适配多种控制逻辑。
高负载能力:触点额定 2 A @ 250 V AC 或 2 A @ 30 V DC(阻性负载),可直接驱动中小型执行机构。
强电气隔离:通道间及对系统地隔离电压 ≥ 1500 V RMS,符合IEC 61010安全标准。
热插拔支持:可在Mark VIe系统运行中安全更换,最大限度减少非计划停机。
前面板状态指示:每个通道配有双色LED(绿色=激活,红色=故障/未就绪),便于快速诊断。

功能安全兼容:虽非SIL认证专用件,但其高可靠性设计常用于基本过程控制(BPCS) 及安全相关辅助回路,配合整体系统可满足IEC 61508理念。


QQ:3699232536

邮箱:[email protected]

Mail consultation
Please feel free to give your inquiry in the form below.