Home
>
Products >
GE （通用电气）

GE IC698CPE010-JQ

Brand:GE

Model: IC698CPE010-JQ

Part No: IC698CPE010-JQ

Describe: PLC processor module

Status: New/Used

GE IC698CPE010 is the central processing unit (CPU) module of the GE Fanuc series PLC, designed specifically for industrial automation control systems. This module has high-speed logic processing capability, rich communication interfaces, and stable and reliable working performance

[email protected]

GE IC698CPE010-JQ

The IC698CPE010 is a Central Processing Unit from the GE Fanuc RX7i series. This device is capable of controlling industrial machinery and material processes in real-time. It communicates with other devices and modules through a VME64 connection backplane mounted to the rack.

The IC698CPE010 has a 300MHz Celeron microprocessor capable of performing floating point calculations. The standard speed of each Boolean function is 0.33ms per coil. Other features of this device include but are not limited to the following: three embedded serial ports and two Ethernet ports, bit-in-word reference support, symbolic variable support, a Test Edit mode, and data monitoring over the web.

This device has 10 megabytes of RAM memory for data and programming information. This memory is sustained by a CMOS battery. An additional 10 megabytes of non-volatile flash memory (NVRAM) is also provided. The operating system firmware data is stored in flash memory. Firmware can be updated without taking apart the device or replacing the EPROMs.

There are two means to operate the IC698CPE010: the three-position run/stop switch and connecting the device to a computer and running the appropriate software. Connecting this device to a computer is possible via the serial or Ethernet ports. Note: Using the Ethernet port will require IP addressing and a Cat5 cable. For serial connections, the SNP protocol is used. For configuration and programming of this device, Proficy Machine Edition PLC-Logic Developer software is used on the attached computer. Configuration data is secured with a password.

Many products have not been launched yet. If you need more products, please contact us

Purchase consultation hotline: 18120742318

QQ：3699232536

Email: [email protected]

IC698CPE010是GE Fanuc RX7i系列的中央处理单元。该设备能够实时控制工业机械和材料过程。它通过安装在机架上的VME64连接背板与其他设备和模块通信。
IC698CPE010具有300MHz赛扬微处理器，能够执行浮点计算。每个布尔函数的标准速度为每个线圈0.33ms。该设备的其他功能包括但不限于以下内容：三个嵌入式串行端口和两个以太网端口、字内位引用支持、符号变量支持、测试编辑模式和网络数据监控。
该设备有10兆字节的RAM存储器，用于数据和编程信息。该存储器由CMOS电池维持。还提供了额外的10兆字节非易失性闪存（NVRAM）。操作系统固件数据存储在闪存中。固件可以在不拆卸设备或更换EPROM的情况下进行更新。
操作IC698CPE010有两种方法：三位运行/停止开关，将设备连接到计算机并运行相应的软件。可以通过串行或以太网端口将此设备连接到计算机。注意：使用以太网端口需要IP地址和Cat5电缆。对于串行连接，使用SNP协议。对于该设备的配置和编程，在连接的计算机上使用Proficy Machine Edition PLC Logic Developer软件。配置数据使用密码进行保护。

许多产品尚未推出。如果您需要更多产品，请联系我们
购买咨询热线:18120742318

QQ:3699232536

邮箱:[email protected]

Mail consultation

Please feel free to give your inquiry in the form below.