GE IS400TDBTH6AEF

GE IS400TDBTH6AEF is an original FA Discrete Simplex Board exclusively designed for the GE Mark VI turbine control system, manufactured in USA. This discrete simplex board is installed inside standard Mark VI control racks and serves as the core digital signal collection and output unit for turbine auxiliary equipment. It processes discrete on-off signals from field limit switches, solenoid valves, emergency stop devices and auxiliary feedback transmitters, and exchanges real-time digital data with main control boards through the proprietary Mark VI backplane bus. The single-channel simplex structure simplifies routine signal collection for non-critical auxiliary loops, while built-in multi-stage isolation circuits eliminate ground loop drift and electromagnetic noise generated by high voltage distribution cabinets and large driving inverters, guaranteeing stable and accurate discrete signal transmission under severe power plant electromagnetic environments. The board is constructed with high temperature resistant, vibration-proof industrial PCB and industrial-grade signal processing chips, capable of continuous 24-hour operation under cabinet conditions including high temperature, dust accumulation, oil mist erosion, high humidity and intense radio frequency interference. Standard vertical plug-in rack mounting optimizes cabinet space layout and streamlines daily maintenance tasks such as discrete signal loop debugging, wiring continuity inspection and spare board replacement.

Email: [email protected]

GE IS400TDBTH6AEF是专为GE Mark VI涡轮机控制系统设计的原始FA离散单板，在美国制造。该离散单板安装在标准Mark VI控制架内，作为涡轮机辅助设备的核心数字信号采集和输出单元。它处理来自现场限位开关、电磁阀、紧急停止装置和辅助反馈变送器的离散开关信号，并通过专有的Mark VI背板总线与主控制板交换实时数字数据。单通道单工结构简化了非关键辅助回路的常规信号采集，而内置的多级隔离电路消除了高压配电柜和大型驱动逆变器产生的接地回路漂移和电磁噪声，保证了在恶劣的电厂电磁环境下稳定准确的离散信号传输。该板采用耐高温、防振的工业PCB和工业级信号处理芯片构建，能够在高温、积尘、油雾侵蚀、高湿度和强烈射频干扰等机柜条件下连续24小时运行。标准垂直插入式机架安装优化了机柜空间布局，简化了离散信号回路调试、接线连续性检查和备用板更换等日常维护任务。

QQ:3699232536

邮箱:[email protected]